Steel structure plant: it leads the construction of industrial production plants nationwide in full swing, and the steel structure plant has the advantages of beautiful appearance, diversified building shapes, bright colors, high degree of industrialization of steel component production, low cost, short structure, etc. With the advantages of short construction period, simple installation and construction, flexible plane layout, light weight, convenient material design and calculation, and recyclability, point type steel structures are widely used in modern industrial plants. At the same time, how to maintain the steel structure plant in the later use is also crucial. The following describes the maintenance methods in the use of the steel structure plant in the later period.
Steel structure workshop repair:
1. The steel structure workshop is the connection of the whole structure. Electrical lighting equipment and wires shall not be directly tied to steel members. Pipes or tanks shall be installed separately to avoid electric shock.
2. The steel structure components shall be repaired every three years to extend the overall appearance and service life of the steel structure plant.
3. After the installation of the steel structure workshop, the owner shall not change the structure, remove the bolt components, increase or decrease the partition wall without authorization, and can replace it after consultation with the steel structure manufacturing company.
Maintenance of steel structure workshop:
1. In order to find potential problems, the iron and steel plant must conduct regular cleaning and maintenance, and usually conduct routine inspection at least once a year.
2. If the metal plate surface of the steel structure workshop is damaged, it should be repaired in time to avoid the corrosion of the metal plate surface in the sun and rain. If it is necessary to use fully coated high elastic nano materials to protect the metal roof panel, and play an effective role in heat preservation, waterproof and energy conservation for indoor air conditioning.
3. The cleaning of exterior wall of steel structure factory depends on the environment to a large extent. When cleaning the surface, pay attention to no scratch, avoid using bleach and abrasives, do not use steel balls and wear-resistant products, and use clean water from top to bottom.
